Categories

Contact Us

Add:Zhangmingqiao Qianzhou Huishan, Wuxi, Jiangsu, China

Tel:+86-510-68783338

Mobile:+8613914103158

Fax:+86-510-68006664

E-mail: weitepress@aliyun.com

News

Home > News > Content
Extrusion Press Different Types Of Extruders
Aug 09, 2017

Extrusion Press Different types of extruders

Extruder in the aluminum extrusion machine, which is one of the types of extruder, but also one of the products on the site, so its understanding and understanding, it can be said is imperative. Moreover, it is for us, but also can benefit from, to understand the different types of extruder. So the next, may wish to have been based on the front, continue to go on, so that you can also achieve the above objectives.

 1. Aluminum extruder tonnage size, how to know?

    Aluminum extruder tonnage size, you want to know, you can see the extruder squeeze the beam on the label, or the initial interface of the console, the above will have a corresponding description. However, we need to know is that even the same type of aluminum extrusion machine, which is also able to squeeze different specifications of the cast rod, and not just can only be one.

     2. What are the common problems with aluminum extruders during use? In addition, its price, mainly with what?

    Aluminum extruder, in the course of its use, often the problems that arise, there is a sudden stop running, as well as some mechanical or other aspects of the fault, so in these two, we should pay attention, can not be taken lightly. In addition, the price of this kind of extruder, in general, mainly with the manufacturer, specifications, models, and the use of requirements, so, should be taken into account, there can be no omissions.

    3. Aluminum extrusion machine in the heating pipe, which is easy to damage the reasons, what?

    Aluminum extrusion machine in the heating pipe, if it is easy to damage, then the specific reasons, mainly in the following few: First, the heating tube material selection is not appropriate, or material quality is not qualified; Second, the heating In the process of production, there is a problem with the production process, or its design is improper, such as the pipe wall is too thin; the third is the heating pipe and the gap between the mold is too large, resulting in its dry and damaged.

In the different types of extruders, both the website product, but also the site keywords, is one for the aluminum extrusion machine, and it is also a commonly used type of extruder, so it is necessary to understand and understand. So, for this consideration, the following, may wish to have been based on the front, continue to introduce the description of the product, so that we can get some new knowledge, that is, to benefit from their own.